Setup and Placement of Airtame 2

Kate Smith-Ziegler Updated by Kate Smith-Ziegler

The configuration of your Airtame 2 is done prior to delivery to your school. Please do NOT reset these devices as factory settings will not allow the device to configure to the proper network. If an issue arises, please call the Service Desk 617-635-9200
Placement of the Airtame 2 is very important. The Airtame should have a line of sight with your room's access point. Computers between the access point and the Airtame may also affect the functionality of your Airtame.

  1. Connect the Airtame 2 to the USB-C cable. 
  2. Connect the HDMI connection to your device.
  3. Connect the final plug to your power brick. 
  4. Plug the power brick into the wall or power strip. 
  5. Check that your TV input is on the same input that your HDMI plug is plugged into. You may need to click “Input” until you are on the correct channel. 
  6. You should see the Boston Public Schools logo, the device name, and the IP address at the bottom of the screen. 
  7. On your computer, locate your Airtame application. (Try searching by using the magnifying glass on the top right corner of your screen for "Airtame"). 
  8. When in the Airtame application devices near you will show up. You can search by name or IP address. You may also want to “star” devices you use often.

For more information on connecting Airtame to your device, video support, and FAQs, check out our Main Webpage on Airtame.

How did we do?

How to enable Airtame with MacOSX Catalina

Contact